Recommended Products
IC-2 Interpreter Control Console
The Williams Sound IC-2 is an audio control center for simultaneous interpretation of one or more languages. As a stand-alone unit, it allows one or two interpreters to monitor floor or relay sources, activate microphone inputs, and route the interpretation signal to one of two language groups. Ideal for presentation-style conferences of up to 14 languages, where a floor and a single relay language are used. Can be used with Williams Sound FM, infrared and Digi-Wave™ transmitters for portable or fixed installations. Designed to meet international standards for portable interpretation consoles.
system includes
(1) IC-2 interpreter control console
(1) WCA 091 25’ CAT 5 cable
(1) TFP 044 power supply
*All items can be purchased separately.
iDSP Advanced Level IV Stationary RF System (216 MHz) LS-71-216
The LS-71 216 MHz Stationary RF System from Listen Technologies is the perfect high-capacity assistive listening solution for permanent installations. Offering coverage up to 914.4 m (3,000 ft.) for venues handling as many as 100 visitors or clients, the complete package includes our LT-800-216 Stationary RF transmitter and four of our high-performance LR-5200-216 iDSP receivers, as well as everything required for immediate assistive listening.
The LS-71 system comes with our LA-381 Intelligent 12-unit charging tray, which provides plenty of capacity for charging, storing, and managing up to twelve (12) receivers. The high-capacity tray allows room for upgrading and expanding your RF system as the demands of your venue grow.
An assistive listening notification signage kit, cable management unit, log book, disinfecting wipes, and more are also included to create a conveient and complete solution for offering assistive listening immediately.
iDSP Advanced Level I Stationary RF System (216 MHz) LS-56-216
Designed to make it faster and easier to offer multi-channel assistive listening to your visitors and clients, the LS-56 Advanced Level I Stationary RF System includes our LT-800-072 72 MHz transmitter, telescoping antenna, and four (4) LR-5200-072 Advanced iDSP receivers.
The LR-5200-072 offers listeners exceptional audio performance and clarity thanks to having 20 dB less hiss than other RF receivers on the market. Each receiver gives listeners the choice of multiple channels, ideal for venues where language interpretation or alternate/separate audio streams are made available. The rechargeable Lithium-ion battery in each receiver offers long life and significant cost savings over the life of each unit, and they fully recharge within 2.5 hours.
Additionally, the LS-56 is complete with universal ear speakers, neck loops/lanyards, 4-port USB charger, and assistive listening notification signage kit needed to meet the needs of your customers and ensure your venue’s compliance at the same time.
Portable Programmable Display RF Receiver (216 MHz) LR-500-216
Combining powerful, crystal-clear audio performance with the ability to program each unit, the LR-500-216 Portable Programmable Display Receiver is a top-of-the-line solution for your assistive listening system. Our signature Look & Listen (TM) LCD display gives you and your users a quick, easy way to check the programming status, channel selection, battery level, signal strength, and more. And Listen Technologies’ SmartCharge (TM) system built into each unit helps to prevent overcharging (when used with NiMH rechargeable AA batteries).
Easy to use and easy to program, the LR-500 offers you a high-performance 216 MHz receiver option for meeting the needs of your visitors or customers.
Includes
One (1) LR-500-216 Portable Programmable Display FM Receiver (216 MHz)
One (1) Owner’s Manual (216 MHz)
Stationary RF Receiver/Power Amplifier (216 MHz) – LR-100-216
Listen’s LR-100 Stationary RF Receiver/Power Amplifier is a stationary auditory assistance receiver with a built-in power amplifier. When used with a Listen transmitter, the LR-100 can deliver high quality audio for use in a variety of locations and applications — most commonly with a wireless audio distributed system. This unit has Listen’s signature Look&ListenTM LCD Display showing channel, lock, and battery level. A security cover protects auxiliary and receiver volume, adjustable squelch and trim controls. It has an balanced or unbalanced speaker wire output options. Multiple input options give this unit great flexibility. It’s powered by a 15 VAC/1000mA power input or 12 VDC battery. An antenna is needed for reception.
Includes
One (1) LR-100 Stationary RF Receiver/Power Amplifier
One (1) LR-100 manual
One (1) LA-201 15 VAC Power Supply
One (1) LA-124 90° Helical Antenna (216 MHz)
One (1) Hex Wrench
Protective Pouch for Portable RF Products – LA-319
Made of sturdy, protective nylon, the pouch is designed to be used with all Listen Portable RF units. Controls, belt clip and connections are all easily accessible through openings, and a clear plastic window allows you to view LCD display. The pouch protects the portable products from weather, drops, and harsh environments. This is a great way to protect your investment.
Includes
One (1) LA-319 Protective Pouch for Portable RF Products
Soft Case From Listen Technologies – LA-306
Includes
One (1) Nylon pouch
One (1) Shoulder strap
Assistive Listening Notification Signage Kit – LA-304
The LA-304 Assistive Listening Notification Signage Kit helps you achieve compliance with assistive listening regulations while also ensuring that visitors know about your system’s availability. Each kit includes one (1) clearly printed plaque and one (1) window sticker, each of which is easily mounted in a convenient and highly visible location in your venue.
Includes
One (1) Hard Plaque
One (1) Static Cling Window Sticker
Multi-Lingual Assistive Listening Notification Sign – LA-303
Ensure that your business or venue is in compliance with all regulations with the LA-303 Multi-lingual Assistive Listening Notification Sign. Each sign includes language in English, French, and Spanish to let visitors know that an assistive listening system is available for their use. The sign is easily mounted to walls utilizing the included foam tape, or can be placed on a table with the double-wing easel (also included).
Includes
One (1) LA-303 Multi-Lingual Assistive Listening Notification Sign
One (1) Double Wing Easel
One (1) Instruction Sheet
Microphone Adapter for LT-800/LT-82 – LA-280
Microphone Adapter for LT-800/LT-82 – LA-280
The LA-280 adapter enables a user to plug a mic with a 1/8 in (3.5 mm) tip into the 1/4″ connector of the LT-800/LT-82.
Includes
One (1) LA-280 ¼ in. to 3.5 mm Microphone Adapter for LT-800/LT-82
Over-the-Ear Microphone – Presentation Style – LA-279
Omnidirectional microphone that secures over the user’s ear. Provides high quality audio pickup with a comfortable format for extended wear.
Includes
One (1) LA-279 Over-the-Ear Microphone – Presentation Style
One (1) Protective Case
Behind-the-Head Microphone – LA-278
This directional microphone is our most popular microphone with Listen users. It secures over the speaker’s ears and wraps around the back of the neck. It has great-audio quality, is comfortable to wear and is good for extended use.
Includes
One (1) LA-278 Behind-the-Head Microphone
Conference Microphone – LA-277
This microphone is an omnidirectional microphone that sits on a table top. It’s designed for applications such as audio conferencing, voice amplification, meeting room monitoring and sound reinforcement. Stands 2 inches tall and has a weighted base. Use with Listen’s LT-700 Portable RF Transmitter or LT-84 ListenIR Transmitter/Radiator Combo for a portable assistive listening system.
Includes
One (1) LA-277 Conference Microphone
Hand Held Microphone – LA-274
High quality hand-held, directional microphone. This microphone includes a mute switch, wire stand, and case. This microphone is often used when the speaker fields questions and is passing the microphone around to the audience.
Includes
One (1) LA-274 Hand Held Microphone
One (1) Windscreen
One (1) Wire Stand
Line/Mic Y Input Cable for LT-700 – LA-263
The LA-263 input cable allows the LT-700 portable RF transmitter to simultaneously use a microphone and an additional audio source such as; an MP3 player or Smartphone. When used, both the microphone and an additional line level audio source are summed together and input into the LT-700 transmitter.
This allows both audio sources to be simultaneously transmitted from the LT-700 to the listeners using a ListenRF receiver. The cable has a 3.5 mm male connector which plugs into the LT-700 transmitter, which splits to the following ends: a female 3.5 mm connector (for the microphone input) and a male 3.5 mm connector (for the input of line level audio). The Y cable is 12 in. (30.48 cm) long.
Please note that the “Mute” function on the LT-700 portable transmitter only mutes the microphone, but still allows the line level audio to be heard. This can be a very useful feature as background content can be played during a tour, whether the microphone is muted or not.
Includes
One (1) LA-263 Line/Mic Input Cable for LT-700
Search results: “Whisper Cube”
Showing all 5 results
-
Interpreter Booths, Multi Caisses
Whisper Cube TB-0073
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
- Included soft side carrying case
- Outside included case dim. 69,5 cm x 69,5 cm x 25,6 cm (L x H x D)
- Double Plexiglas®
- ATA shipping case
SKU: TB-0073$1,370.00 -
Interpreter Booths, Multi Caisses
Whisper Cube TB-0070
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
- Included soft side carrying case
- Outside included case dim. 69,5 cm x 69,5 cm x 25,6 cm (L x H x D)
- Double Plexiglas®
- ATA shipping case
SKU: TB-0070$1,540.00 -
Interpreter Booths, Multi Caisses
Whisper Cube TB-0068
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
- Included (1) ATA-300 shipping cases on wheels (52,5 kg for 2 cases)
- Outside case dim. 213,36 cm x 83,82,22 cm x 49,5 cm (L x H x D)
- Included (2) H.D. 55 CFM silent whisper 110 or 220 volts fan assembly units CSA approved with (2) electric outlets for accessories
- Easy to install working table
- Double Plexiglas® windows
- Air conditioning
- Soundproof flooring
- Interior partition systems
- Custom size built
SKU: TB-0068$4,140.00 -
Interpreter Booths, Multi Caisses
Whisper Cube TB-0066
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
- Included (2) ATA-300 shipping cases on wheels (105 kg for 2 cases)
- Outside case dim. 213,36 cm x 83,82,22 cm x 36,6 cm (L x H x D)
- Included (2) H.D. 55 CFM silent whisper 110 or 220 volts fan assembly units CSA approved with (2) electric outlets for accessories
- Easy to install working table
- Double Plexiglas® windows
- Air conditioning
- Soundproof flooring
- Interior partition systems
- Custom size built
SKU: TB-0066$7,400.00 -
Interpreter Booths, Multi Caisses
Whisper Cube TB-0064
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
- Included (2) ATA-300 shipping cases on wheels (105 kg for 2 cases)
- Outside case dim. 213,36 cm x 83,82 cm x 38,10 cm (L x H x D)
- Included (2) H.D. 55 CFM silent whisper 110 or 220 volts fan assembly units CSA approved with (2) electric outlets for accessories.
- Easy to install working table
- Double Plexiglas® windows
- Air conditioning
- Soundproof flooring
- Interior partition systems
- Custom size built
SKU: TB-0064$7,900.00
