Recently Viewed
Intelligent DSP RF Receiver (72 MHz) LR-4200-072
The LR-4200-072 receiver from Listen Technologies offers outstanding audio clarity and quality with the best range and reception in its class.
Part of our Intelligent Digital Signal Processing (iDSP) line, the LR-4200-072 is the smallest device of its kind, resulting in a compact unit that won’t burden the end user. An integrated neck loop/lanyard makes each receiver easy to wear, and the DSP loop driver offers an improved listening experience for anyone with a T-coil-equipped hearing aid. Dual 3.5mm output jacks also allow receivers to be shared between users.
Each receiver is equipped with a micro USB connection which can be used with free iDSP software for charging, set up, programming, inventory management and firmware updates.
Extended speaking sessions, presentations and more can be challenging for other devices, but the LR-4200-072 incorporates advanced Lithium-ion rechargeable batteries that offer long life and reliable power. Charge status, along with channel information and volume level, are easy to read on the integrated OLED display.
From classrooms to boardrooms, conferences and more, the LR-4200-072 is an outstanding receiver choice for any venue looking to offer convenient, reliable assistive listening.
Mini lapel clip microphone MIC 090
Heavy-duty dual-muff headset microphone MIC 068
Universal Rack Mounting Kit – LA-326
The LA-326 Universal Rack Mounting Kit allows you to install Listen Technologies’ LT-800, LT-803, LT-82, and LR-100 in a standard audio rack. The kit is capable of single or dual-unit mounting, and antenna kits are available separately for specific frequencies/applications.
Includes
One (1) LA-326 Universal Rack Mounting Kit
One (1) Left side bracket
One (1) Right side long bracket
One (1) Right side short bracket
One (1) Dual mount center bracket
Ten (10) Machine screws
One (1) Quick Reference Card
High Capacity AAA Alkaline Batteries (2) – LA-363
Our LA-363 High-Capacity AAA alkaline batteries offer a simple and easy-to-replace power solution for several Listen products. Each package includes two (2) long-lasting batteries.
Includes
Two (2) LA-363 High Capacity AAA Alkaline Batteries
Helical Top Mounted Antenna (72 MHz)
The LA-101 Helical Top Mounted Antenna mounts to our LT-800-072 72 MHz transmitter, allowing for use and installation in low-clearance applications where space is at a premium. It offers a cost-effective antenna solution for smaller venues or spaces where transmission range is not a concern.
Includes
One (1) LA-101 Helical Top Mounted Antenna (72 MHz)
Telescoping Top Mounted Antenna (72 MHz) – LA-106
Offering extended coverage and easy installation, the LA-106 Telescoping Top Mounted Antenna quickly mounts to the LT-800-072 Stationary RF Transmitter (72 MHz). The telescoping design offers increased range compared to the LA-101 antenna, and is ideal for setups where space is available to extend the antenna fully.
Includes
One (1) LA-106 Telescoping Top Mounted Antenna (72 MHz)
Ground Plane Remote Antenna (216 MHz) – LA-107
Thanks to its durable construction and design, the LA-107 Ground Plane Remote Antenna (216 MHz) is a great choice for use in high-wind environments or other difficult conditions. The LA-107 includes a U-bolt bracket for mounting to a conduit or pole, and it can be placed upright without the use of an external bracket.
Includes
One (1) LA-107 Ground Plane Remote Antenna (216 MHz)
15.2 m (50 ft.) RG58, 50 ohm coaxial cable (PL-259 and BNC connectors)
Mounting hardware
Coaxial Dipole Remote Antenna (72 MHz) – LA-116
Made for permanent installations, the LA-116 flexible dipole antenna can be mounted on a wall, inside a drop ceiling, or anywhere that requires discreet placement and extended range. Configured for use with our 72 MHz transmitters and receivers, the LA-116 is 203 cm (80 in.) in length and flexible to fit any space or venue where it is needed.
Includes
One (1) LA-116 Coaxial Dipole Remote Antenna (72 MHz)
Universal Antenna Kit (72 and 216 MHz) – LA-122
Thanks to its durable construction and design, the LA-107 Ground Plane Remote Antenna (216 MHz) is a great choice for use in high-wind environments or other difficult conditions. The LA-107 includes a U-bolt bracket for mounting to a conduit or pole, and it can be placed upright without the use of an external bracket.
Includes
One (1) LA-107 Ground Plane Remote Antenna (216 MHz)
15.2 m (50 ft.) RG58, 50 ohm coaxial cable (PL-259 and BNC connectors)
Mounting hardware
Coaxial Dipole Remote Antenna (216 MHz) – LA-117
Made for permanent installations, the LA-117 flexible dipole antenna can be mounted on a wall, inside a drop ceiling, or anywhere that requires discreet placement and extended range. Configured for use with our 216 MHz transmitters and receivers, the LA-117 is 68.6cm (27 in.) in length and flexible to fit any space or venue where it is needed.
Includes
One (1) LA-117 Coaxial Dipole Remote Antenna (216 Mhz)
90 Degree Helical Antenna (72 MHz) – LA-123
Designed to mount to the rear BNC antenna connector, the LA-123 antenna offers and outstanding coverage range up to 600 ft (182.88 m). The 90-degree antenna is compatible with the 72 MHz versions of our LT-800 transmitter, LR-100 receiver/amplifier, and the LR-600 receiver/speaker. The LA-123 is also included with the LA-125, allowing the antenna to be placed in front of the equipment rack for specific application and installation needs.
Includes
One (1) LA-123 90° Helical Antenna (72MHz)
90 Degree Helical Antenna (216 MHz) – LA-124
Designed to mount to the rear BNC antenna connector, the LA-124 antenna offers and outstanding coverage range up to 198m (650 ft.). The 90-degree antenna is compatible with the 72 MHz versions of our LT-800 transmitter, LR-100 receiver/amplifier, and the LR-600 receiver/speaker. The LA-124 can also be used to create a custom, remote antenna, such as a wall plate-mounted antenna.
Includes
One (1) LA-124 90° Helical Antenna (216 MHz)
Antenna Kit for Rack Mount (72 MHz) – LA-125
Designed to adapt our LA-326 Rack Mount Kit to accept antenna mounting, the LA-125 includes a 90-degree helical antenna and can be used to build your own antenna for specific application and installation needs. Compatible with our LT-800 transmitter and LR-100 receiver, the antenna provides excellent coverage for small and medium venue.
Includes
One (1) LA-125 90° Helical Antenna (72MHz)
One (1) 18 in. BNC to BNC Cable
One (1) BNC feed-through Connector
One (1) Manual
Antenna Kit for Rack Mount (216 MHz) – LA-126
The LA-126 Antenna Kit for Rack Mount works in conjuntction with the LA-326 Rack Mount Kit to adapt it for use as an antenna mount. The kit includes a 90-degree helical antenna, and can be used to build your own antenna setup specific to your installation needs. The LA-126 is compatible with both the LT-800 Stationary Transmitter and the LR-100 Stationary Receiver, offering excellent coverage and range for either device.
Includes
One (1) LA-124 90° Helical Antenna (216 MHz)
One (1) 18 in. BNC to BNC Cable
One (1) BNC feed-through Connector
One (1) Manual
ListenIR Expansion Radiator (For LT-84 only) – LA 141
The LA-141 Expansion Radiator (Pat. 9,712,246) from Listen Technologies expands on the functionality and coverage area of the LT-84 Infrared Transmitter/Radiator combo system, giving users and clients an uninterrupted, high-performance listening experience.
Up to four (4) LA-141 Expansion Radiators can be added to the LT-84 system, providing additional coverage up to 2,787 m2 (30,000 ft2) with LR-4200-IR/LR-5200-IR receivers or 697 m2 (7,500 ft2) with LR-42/LR-44 receivers in single-channel mode. A single CAT-5e cable provides both power and signal to the radiators, and the included mounting hardware and single-cable design make installation and setup a breeze.
Includes
One (1) LA-141 ListenIR Expansion Radiator
One (1) 25 ft. (7.6 m) CAT-5e Cable
One (1) LA-344 Flexible Mounting Hardware
One (1) Quick Start Guide
Replacement Cushions for Ear Buds (20) – LA-163
Replacement Cushions for Ear Buds (20) – LA-163
Quickly and easily replace worn cushions on our LA-161 and LA-162 ear buds with the LA-163 replacement cushion pack. Each package includes twenty (20) direct-fit cushions.
Includes
One (1) LA-163 Replacement Cushions for Ear Buds (20)
