, , ,

Digi-Wave 300 Boardroom System DWS BR1

Williams Sound
Availability:

40 in stock


Simultaneous, two-way wireless intercom system (2.4 GHz) ideal for use in conference rooms.

System Includes

(2) DLT 300 transceivers
(1) DLR 300 receiver
(2) MIC-014-R plug-mount microphones
(2) MIC 049 omnidirectional conference microphones
(1) BAT 022-2 rechargeable batteries
(1) DWD 102 Digi-Wave Dock.

The DLT 300 Transceiver features full-duplex capability, supporting up to six simultaneous talkers in two-way mode.  Slim, lightweight, and simple to set up and use.  One- or two-way operation offers flexibility in an array of applications.  With the push of a button, users can access two-way communication for immediate interaction or Q&A.

NOTE: Due to enhancements in the DLT 300, the new Digi-Wave 300 Series is not compatible for use with Digi-Wave 2.0 products.

$2,179.00

40 in stock

$2,517.00 for 2 item(s)

Digi-Wave 300 Boardroom System DWS BR1

Weight 5.4 lbs
brands

Williams Sound

BAT 022-2

NiMH, 1.2 Volt, 950 mAh

DLR 360 Architectural and Engineering Specifications

The receiver shall be a digital receiver operating on the 2.4GHz ISM band.  It shall have the ability to communicate with the DLT 300 transceiver.
The receiver shall be housed in plastic enclosure 3.54″ H x 2.36″ W x 0.63″ D (90 mm x 60 mm x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station.
The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 18 hrs with two NiMH batteries. It’s power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with an audio frequency response of 140 Hz to 11.5 kHz in Conference Mode and Interpreter Mode, and 140 Hz – 7.6 kHz in Intercom Mode.
The transceiver shall have power, vol +, vol -, v and ^ buttons.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).
This receiver shall be the Williams Sound model DLR 360.

DLR 360

These specifications are Preliminary and may be subject to change without notice.

Dimensions:

2.36″ W x 3.54″ H x 0.63″ D

(60 mm x 90 mm x 16 mm)

Weight:

1.7 oz. (47 g) without batteries.

Frequency Band:

2.4 GHz (ISM band)

Modulation:

FSK

Multi Channel:

Up to 15 simultaneous channels (one way mode)

Case Material:

Black ABS Plastic

Battery Type:

2 x AAA Alkaline or NiMH

Battery Life:

Alkaline Disposable (BAT 010-2): Up to 24 hrs

NiMH Rechargeable (BAT 022-2): Up to 18 hrs

Power Save:

Auto Sleep Mode after 5 minutes of no RF signal from compatible devices

Audio Frequency Response:

(-3dB knee level)

Conference Mode:  140 – 11.5 KHz

Intercom Mode:  140 – 7.6 KHz

SNR:

65 dB (A-weighted)

THD:

0.1% (typical)

Antenna:

Internal

Headphone Audio Output:

3.5 mm stereo jack with mono output for headphones, earphones, or neckloop

27 mW maximum @33Ω mono

Internal Speaker (disabled when headphone jack in use)

Controls:

Power, Volume +/-, Channel +/-, Setup, Battery Type

Display:

LCD shows status: Battery Level, RSSI, Group/Channel#

Indicators:

Red LED – blinks when charging

Green LED – stays on when charged

Docking Connector:

30-pin iPod Style for charging and audio out

Compatible Transmitter:

DLT 300 only

Temp. Range:

32° – 122°F  (0° to 50°C)

Optional Chargers:

2-bay CHG 102, 12-bay CHG 1012, TFP 045

Accessories:

Silicone Skin, Lanyard, Wrist Strap

Approvals:

FCC, Industry Canada, RoHS, CE, WEEE, RCM

Warranty:

2 years parts and labor (90 days on accessories)

DLT 300 Architectural and Engineering Specifications

The transceiver shall be a digital transceiver operating on the 2.4 GHz ISM band utilizing FSK modulation with patented frequency-hopping software to reduce interference potential. It shall be compatible with the DLR 360 Receiver. It shall be housed in plastic enclosure 4.07″ H x 2.43″ W x 0.44″ D  (103.3 x 61.8 x 11.3 mm), have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying, battery level, mode, time, channel number, group number, and number of other DLT’s with the talk button on (up to 6). It shall have a built-in microphone and speaker for users opting not to use a headset.
The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The transceiver shall operate in one-way or two-way mode (up to six speakers in a group at any given time) and have a range of up to 750 ft (229 m).
The transceiver shall have power, vol +, vol -, talk, CH +, CH -, v, GRP and ^ buttons. It shall have an illuminated talk button with a tactile braille dot.
The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or guest operation) and (floor + 14 language portable interpretation where common floor language is used).
The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access.
The transceiver shall operate 15 simultaneous channels in interpretation mode, support 4 simultaneous groups in two-way mode, allow a maximum of 4 simultaneous talkers in 2-way mode, and a maximum of 6 simultaneous talkers in Intercom Mode. It shall have a repeater mode to increase the range of the system.
The transceiver shall have a 74 dB (A weighted) SNR with a frequency response of 140 Hz to 11.5 kHz in Conference and Interpreter Modes and 140 Hz – 7.6 kHz in Intercom Mode.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).
This transceiver shall be the Williams Sound model DLT 300.

DLT 300

Dimensions 4.07″W x 2.43″H x 0.44″D (103.3 mm x 61.8 mm x 11.3 mm)
Weight 2.9 oz (82 g)  including battery
Color Black/Silver (Front/Back)
Case Material Black ABS plastic
Battery type Lithium Polymer with smart charge built into transceiver; 2000 mAH
Battery life Up to 14 hrs talk time per charge Current consumption range: 39 mA @ idle to 94 mA w/1 Ch Tx and 3 Ch Rx
Power Save Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time 5 hrs. TFP 045 with cable and international adapters
Optional Chargers 2-bay CHG 102, 12-bay CHG 1012, TFP 045
Simultaneous Channels/Groups/Talkers Up to 15 simultaneous channels (0-14) (Interpretation mode) Up to 4 simultaneous groups (2 way mode) Up to 4 simultaneous talkers per group (2-way mode) Up to 6 simultaneous talkers per group (2-way Intercom mode)
Operating frequencies 2.4 GHz (ISM band);  2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Knee Level) Conference Mode, Interpreter Mode:  140 – 11.5 KHz Intercom Mode:  140 – 7.6 KHz
SNR 74 dB (A-weighted, Maximum output)
THD 0.33 %
Microphone input Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.
Headphone output 3.5 mm phone jack; 33 Ω load
Audio output Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Internal speaker (disabled when haedphone jack in use) <20mW @ 10% THD/RL = 33Ω
Range Up to 750 ft (depending upon environmental conditions)
Modulation FSK
RF output 14 dBm Typical
Security 87 bit encryption, Secure Key Code, Setup Lock (SLOC)
Controls Front panel push buttons for volume up/down, group select, menu access and selection, timer, time, MIC on/off, power on/off, tone control SLOC access and Secure Key access. System reset button (rear panel)
Outputs 3.5 mm stereo/mono headphone jack; 30 pin charging jack with audio out to base stations
Side tone -12 dB below volume, tone variation  [ST:0 = Off, ST:1 = -6 dB, ST:2 = -12 dB]
Indicators LCD (Group, channel, volume level, battery status, mode, number of people with talk button on)
LED’s (charge status) Red LED around talk button when enabled.
Docking Connector 30-pin Connector for charging and audio in/out
Compatible Receiver DLR 360 only
Approvals FCC, Industry Canada, CE, RoHS, WEEE, RCM
Warranty 2 years parts and labor (90 days on accessories); 6 months on internal battery

MIC 014-R

Phantom Powered No
Pick-Up Pattern Omni-directional
Element Electret Condenser
Mic Diameter 10 mm not including windscreen

19 mm with windscreen

Sensitivity -42 dB ± 3 dB
Frequency Range 20 Hz – 16 kHz
Output Impedance 2.2 kΩ
Standard Operation Range 2 – 10 V DC
Signal-to-Noise Ratio >58 dB
Replacement Windscreen WND 002
Optional 12 ft Extension Cord WCA 007
Optional Microphone Clip CLP 014
Color Gold
Weight 5 g (0.2 oz)
Plug 3.5 mm mono
Cord None
Approvals RoHS
Warranty 90 days

MIC 049

Phantom Power 1.2 – 10 VDC
Impedance 1.5 kΩ
Operating Voltage 1.2 – 10 VDC
Freq. Response 100 Hz – 8 kHz
Signal-to-Noise Ratio >60 dB
Pick-Up Pattern Omni-directional
Element Electret-condenser
Sensitivity -38 dB ± 3 dB
Approvals RoHS
Color Black
Weight 0.08 lbs
Plug 3.5 mm mono
Cord Length 36”
Approvals RoHS
Warranty 90 days

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.