, , ,

Digi-Wave Digital Receiver DLR 360

Williams Sound

40 in stock

The conveniently rechargeable DLR 360 Receiver is for listen-only applications.  Simple to set up and use.  Features automatic mode selection and shut-off.  Large LCD screen displays channel, volume, battery level and RF signal strength.  Receives up to two presenters simultaneously during team presentations.  Can be used with earphones, headphones, neckloop or built-in speaker.  Add any quantity for larger groups.  Uses (2) AAA Alkaline or NiMH batteries.

System Includes

Rechargeable NiMH batteries optional for DLR 360 receivers (BAT 022-2) – sold separately.

$241.00 $268.00

40 in stock

Digi-Wave Digital Receiver DLR 360

Weight 0.12 lbs
Dimensions 2.36 × 3.54 × 0.63 in

Williams Sound

DLR 360 Architectural and Engineering Specifications

The receiver shall be a digital receiver operating on the 2.4GHz ISM band.  It shall have the ability to communicate with the DLT 300 transceiver.
The receiver shall be housed in plastic enclosure 3.54″ H x 2.36″ W x 0.63″ D (90 mm x 60 mm x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station.
The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 18 hrs with two NiMH batteries. It’s power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with an audio frequency response of 140 Hz to 11.5 kHz in Conference Mode and Interpreter Mode, and 140 Hz – 7.6 kHz in Intercom Mode.
The transceiver shall have power, vol +, vol -, v and ^ buttons.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).
This receiver shall be the Williams Sound model DLR 360.

DLR 360

These specifications are Preliminary and may be subject to change without notice.


2.36″ W x 3.54″ H x 0.63″ D

(60 mm x 90 mm x 16 mm)


1.7 oz. (47 g) without batteries.

Frequency Band:

2.4 GHz (ISM band)



Multi Channel:

Up to 15 simultaneous channels (one way mode)

Case Material:

Black ABS Plastic

Battery Type:

2 x AAA Alkaline or NiMH

Battery Life:

Alkaline Disposable (BAT 010-2): Up to 24 hrs

NiMH Rechargeable (BAT 022-2): Up to 18 hrs

Power Save:

Auto Sleep Mode after 5 minutes of no RF signal from compatible devices

Audio Frequency Response:

(-3dB knee level)

Conference Mode:  140 – 11.5 KHz

Intercom Mode:  140 – 7.6 KHz


65 dB (A-weighted)


0.1% (typical)



Headphone Audio Output:

3.5 mm stereo jack with mono output for headphones, earphones, or neckloop

27 mW maximum @33Ω mono

Internal Speaker (disabled when headphone jack in use)


Power, Volume +/-, Channel +/-, Setup, Battery Type


LCD shows status: Battery Level, RSSI, Group/Channel#


Red LED – blinks when charging

Green LED – stays on when charged

Docking Connector:

30-pin iPod Style for charging and audio out

Compatible Transmitter:

DLT 300 only

Temp. Range:

32° – 122°F  (0° to 50°C)

Optional Chargers:

2-bay CHG 102, 12-bay CHG 1012, TFP 045


Silicone Skin, Lanyard, Wrist Strap


FCC, Industry Canada, RoHS, CE, WEEE, RCM


2 years parts and labor (90 days on accessories)

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…