Recommended Products
PPA SelectView FM Receiver PPA R38N
PPA SelectView™ (PPA R38N) FM Receiver. High-resolution OLED screen. Quick view of receiver status and immediate entry to all user settings. On-screen channel selection with easy access to 17 pre-set, wideband frequencies (72-76 MHz). Compatible with the following Williams Sound transmitters: PPA T46, PPA T45, PPA T45NET, PPA T27. Digitally synthesized for exceptional audio clarity and stability. Digital tuning, digital squelch and battery-saving sleep mode. New stereo jack paired with the mono jack adds compatibility with variety of earphones/headphones. Rechargeable.
System Includes
(1) PPA R38N Receiver
(1) CLP 023 Belt Clip
Earphones/Headphones/Batteries sold separately.
All items can be purchased separately.
SoundPlus® 4-channel Infrared Receiver WIR RX22-4N
The WIR RX22-4N is a four-channel selectable, infrared receiver compatible with transmitters operating on the 2.3/2.8/3.3/3.8 MHz bandwidth. Dual infrared detectors maximize sensitivity and operating range. Range of up to 28,000 square feet (2,600 square meters) in single-channel mode when used with a Williams Sound WIR TX925 or WIR TX90 infrared system. Comfortable, body-pack design features convenient channel selector and easy-to-use on/off volume control. The RX22-4N can be used with mono or stereo headphones, earphones or a neckloop (lanyard included).
Note: Headphones, earphones, or neckloop sold separately.
System Includes
(1) WIR RX22-4N Receiver
(2) RCS 004 Lanyard
PPA Select FM Receiver PPA R37
Flexible and simple. The PPA Select FM receiver features easy-to-use, seek-button channel selection with access to 17 pre-set wideband frequencies between 72-76 MHz. Compatible with the following Williams Sound transmitters: PPA T46, PPA T45, PPA T45NET, PPA T27. Digitally synthesized for even greater audio clarity and stability. A versatile 3.5mm stereo/mono jack allows for a variety of earphone and headphone options, and is neckloop/telecoil-equipped-hearing-aid compatible.
NOTE: The PPA Select Receiver requires a transmitter operating on 72-76 MHz. The PPA Select is approved by the FCC for operation in U.S. Markets. The receiver cannot be used in all countries. Check with your government´s radio regulations for 72-76 MHz operation.
System Includes
*All items can be purchased separately
Whisper Cube TB-0073
Each panel is built with exterior covering of expanded vinyl with special sound barrier of acoustic foam and MIL-B131-H laminating aluminium foil. The inside covering is made with decorative 100% polyester cotton 9 mm woven density, framing is high density PVC extrusion with unique connecting concept with industrial Velcro for easy assembly without tools.
Options:
Body-pack Transmitter PPA T46
The PPA T46 transmitter will broadcast a speaker’s voice or audio program on one of 17 available channels, 72-76 MHz, to listeners using PPA R38 or PPA R37 receivers. The unit features flexible microphone and auxiliary input jacks, push-button on/off/mute controls, channel lock and selectable compression. The T46 has the ability to operate in dual channel mode, allowing the user to easily switch between two different transmitting channels, each with its own set up parameters. An OLED screen displays current operating status and menu information. The PPA T46 operates up to 30 hours on two (2) AA Alkaline batteries, and up to 20 hours with two (2) NiMH batteries. It has recharge capability when used with Williams Sound drop-in chargers. Lightweight and portable, the PPA T46 will operate at a range of up to 150 feet (46m) from the listening audience. Ideal for providing hearing assistance to students in the classroom, tour group participants, employee training, business meetings and more.
Note: The Personal PA® system is approved by the FCC for operation in U.S. markets. The Personal PA® cannot be used in all countries. Check with your government´s radio regulations for 72 – 76 MHz operation.
System Includes
(1) BAT 001-2 (2) AA Batteries
(1) WCA 087 Auxiliary Input Cable
FM Tour Guide System -TGS PRO MULTI

FM Tour Guide System -TGS PRO MULTI
This Personal PA Tour Guide System is a lightweight, multi-channel system that helps people with hearing difficulties listen directly to the guide and control their own volume. This features eight selectable frequencies, which allows multiple tour groups to operate in the same vicinity, simultaneously, with no crosstalk or interference. No installation required — save time and money. Ensures wireless/effortless communication between guide and participants. Combines superior audio with easy-to-use controls. Designed to meet Americans with Disabilities Act (ADA) accessibility requirements.
NOTE: The Personal PA Tour Guide System is approved by the FCC for operation in U.S. markets. The system cannot be used in all countries. Check with your government´s radio regulations for 72-76 MHz operation.
System Includes
(1) PPA T46 transmitter
(10) PPA R37-8N receivers
(1) MIC 100 rear-wear headset microphone
(11) BAT 001-2 (two AA batteries)
(1) CCS 030 S carry case
All items can be purchased separately.
Headphones and earphones sold separately.
Dual muff headset microphone MIC 058
Dual headset microphone; (2) 3.5 mm plugs, 42″ Cord length. For use with the Williams Sound DLT 300 transceiver. Ideal for noisy environments.
Applications:
Production Intercom • High Noise Environments • Live Sound Stage • Factory Tours • Military Training
Noise-Cancelling 2-plug Headset Mic MIC 044 2P
Neckloop 18″ (mono plug) NKL 001
Use with hearing aids or cochlear implants equipped with a T-coil switch. 3.5 mm plug, mono, 8 – 16 Ω. Moderate to severe hearing loss.
Safety Breakaway Feature
Integrated safety breakaway device. In the event the neckloop cord becomes entangled with a object in motion, the breakaway device will disconnect the neckloop from the user.
Dual-ear noise-cancelling headset microphone MIC 045
Dual-ear noise-cancelling headset microphone, (2) 3.5mm plugs, 39″ cord, cardioid condenser, 150-18 kHz. Use with IC-2 interpreter console, DLT 300. Replacement Windscreen WND 008, replacement Earpad EAR 035.
This headset replaces the MIC 079.
Search results: “Digi-wave”
Showing all 2 results
-
Chargers, Williams Sound
Digi-Wave charger, 12-bay CHG 1012
This multi-unit, drop-in style charger will conveniently store and charge up to 12 Williams Sound Digi-Wave™ DLT transceivers or DLR receivers over the course of a five-hour time span. Ideal for multiple-transceiver applications where flexibility is key — including tours, conferences and event production.
Includes Power Supply.
SKU: CHG 1012 -
Cases, Williams Sound
Large heavy-duty carry case (120 slot) CCS 053
The CCS 053 is ideal for protecting and transporting large DigiWave, FM, or IR systems. This case has a lower foam insert with 60 slots, and a 60-slot top insert providing 120 total slots. Slots can hold single PPA Transmitters or Receivers, or can hold two Digiwave devices per slot. It has an extendable handle and bottom wheels for easy transport. Ideal for conferences, tour guide systems, or overseas shipping. Compatible with all Williams Sound body-pack transmitters and receivers. 26.2″L x 19.7″W x 13.2″H, 23lbs.
FMP 048: 60-Slot Foam Top Insert
SKU: CCS 053